The operation manuals on this webpage are the most current versions available at this time. All manuals are subject to change without notice. To ensure that you always have the most current manual, please check this website regularly for updates.


Care After Use: Chucking Area

Care After Use: Chucking Area

Neglecting to clean the chuck for a long time is very dangerous because wax, gypsum, etc., accumulates in the chuck and the bur is caught insecurely, causing a run-out. In order to minimize the risk of causing chuck malfunction, please do regular maintenance as follows.

1- Removal of Chuck

Open the ring and turn the chuck counterclock wise with provided spanner wrench to remove the chuck.

2- Cleaning of Chuck and Chucking area

Clean the chuck insertion area of the handpiece with a cotton swab. Please do not conduct air blowing as derbis will lodge into the bearings, which results in heat generation and early abrasion of bearings.